1 Kings 7:43

7:43 the ten movable stands with their ten basins,

1 Kings 7:34

7:34 Each stand had four supports, one per side projecting out from the stand.

1 Kings 7:27

7:27 He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high.

1 Kings 7:35

7:35 On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands.

1 Kings 7:28

7:28 The stands were constructed with frames between the joints.

1 Kings 7:37-38

7:37 He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape.

7:38 He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand.

1 Kings 7:30

7:30 Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths.

1 Kings 7:32

7:32 The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high.

1 Kings 7:39

7:39 He put five basins on the south side of the temple and five on the north side. He put “The Sea” on the south side, in the southeast corner.