1 Kings 7:34

7:34 Each stand had four supports, one per side projecting out from the stand. ¹ 

1 Kings 7:27

7:27 He also made ten bronze movable stands. Each stand was six feet ²  long, six feet ³  wide, and four-and-a-half feet ⁴  high.

1 Kings 7:35

7:35 On top of each stand was a round opening three-quarters of a foot deep; ⁵  there were also supports and frames on top of the stands.

1 Kings 7:28

7:28 The stands were constructed with frames between the joints.

1 Kings 7:37-38

7:37 He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape.

7:38 He also made ten bronze basins, each of which could hold about 240 gallons. ⁶  Each basin was six feet in diameter; ⁷  there was one basin for each stand.

1 Kings 7:30

7:30 Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. ⁸ 

1 Kings 7:32

7:32 The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet ⁹  high.

[7:34]  ¹ tn Heb “four shoulders to the four sides of each stand, from the stand its shoulders.” The precise meaning of the description is uncertain.

[7:27]  ² tn Heb “four cubits.”

[7:27]  ³ tn Heb “four cubits.”

[7:27]  ⁴ tn Heb “three cubits.”

[7:35]  ³ tn Heb “and on top of the stand, a half cubit [in] height, round all around” (the meaning of this description is uncertain).

[7:38]  ⁴ tn Heb “forty baths” (a bath was a liquid measure roughly equivalent to six gallons).

[7:38]  ⁵ tn Heb “four cubits, each basin.” It is unclear which dimension is being measured.

[7:30]  ⁵ tn The precise meaning of this last word, translated “wreaths,” is uncertain.

[7:32]  ⁶ tn Heb “a cubit-and-a-half” (a cubit was a unit of measure roughly equivalent to 18 inches or 45 cm).